THE SELECTION OF INFORMATION-MEASURING MEANS FOR THE ROBOTOTECHNICAL COMPLEX AND THE RESEARCH OF THEIR WORKER CHARACTERISTICS

Authors

  • J. F. Mammadov Sumgait State University, Sumgait, Azerbaijan, Azerbaijan
  • T. A. Ahmadova Sumgait State University, Sumgait, Azerbaijan, Azerbaijan
  • A. H. Huseynov Sumgait State University, Sumgait, Azerbaijan, Azerbaijan
  • N. H. Talibov Sumgait State University, Sumgait, Azerbaijan, Azerbaijan
  • H. M. Hashimova Sumgait State University, Sumgait, Azerbaijan, Azerbaijan
  • A. A. Ahmadov SOCAR Polimer, Azerbaijan, Azerbaijan

DOI:

https://doi.org/10.15588/1607-3274-2025-2-2

Keywords:

Robototechnical complex, information-measuring system, transmitter, inductive sensor, autogenerator, LC motor, semiconductor commutator, analog output transmitter, transmitter error

Abstract

Context. The topic of the article is devoted to the issue selection of the means of the information-measurement system (IMS) for automation of robototechnical complexes (RTC) of flexible production systems applied in various fields of industry, and the research of their technological characteristics.
Objective. The goal is using the mathematical models to researching of the working characteristics of the new construction transmitters for information – measurement and automated control of robototechnical complex in flexible production areas.
Method. In the article, the following issues were set and solved: the analysis of the application object, the selection of the types of information-measurement and management elements of RTC creation and structure scheme; research of the characteristics of the information-measuring transmitter for managing the active elements of the RTC; determining the error of the analog output transmitter of the information-measurement system of RTC active elements. Based on the analysis of the application object, it was determined that the structure scheme of the RTC at the flexible production system includes complex technological, functionally connected production areas, modules and robotic complexes, their automated control system IMS, regulation, execution, microprocessor control system and devices and devices of the industrial network. includes The functional block diagrams of the IMS of RTCi of the flexible production system are given. Based on research, it was found that it is convenient to use a magnetoelastic transducer with a ring sensitive element to measure the mechanical force acting on the working organs of an industrial robot (IR). For this, unlike existing transmitters, the core of this transmitter is made of whole structural steel. The inductive coil of the proposed transmitter is included in the LC circuit of the autogenerator. The magnetoelastic emitter semiconductor is assembled at the base of the transistor. The crosssection of its core is calculated for the mechanical stress that can be released for the steel. The block-scheme of the inductive transmitter is proposed. The proposed transmitters work on the principle of an autogenerator assembled on an operational amplifier. A mathematical expression is defined for determining the output frequency of the autogenerator. The model of the autogenerator consists of a dependent source, the transmission coefficient is determined.
Results. A new transmitter is proposed to measure the information of the manipulator to perform special technological operations synchronously.
Conclusions. A mathematical model was developed to determine the error of the analog output transmitter of the informationmeasurement system of RTC active elements. The expression ehq is used to determine the error of the transmitter whose output is analog during the measurement of the current technological operation. It was determined that in practice, the geometric dimensions of the transmitter and the number of windings remain unchanged during the work process, where it is changed due to the influence of the environment. Considering this variation, a mathematical model was developed to determine the transmitter error.

Author Biographies

J. F. Mammadov, Sumgait State University, Sumgait, Azerbaijan

Dr. Sc., Professor, Head of the Department of Automatic and mechanic

T. A. Ahmadova, Sumgait State University, Sumgait, Azerbaijan

Dr. Sc., Professor of the Department of Energetic

A. H. Huseynov, Sumgait State University, Sumgait, Azerbaijan

Dr. Sc., Professor of the Department of Automatic and mechanic

N. H. Talibov, Sumgait State University, Sumgait, Azerbaijan

PhD, Associate Professor, Head of the Department of Information technology

H. M. Hashimova, Sumgait State University, Sumgait, Azerbaijan

Assistant of the Department of Automatic and mechanic

A. A. Ahmadov, SOCAR Polimer, Azerbaijan

engineer

References

Fujisaki K. High accuracy electromagnetic sensor, IEEE International Magnetics Conference, 2002, pp. 123–134. doi: 10.1109/INTMAG.2002.1001384

Guo Zhaoyu, Shao Lai, Longfei Xu, Lingling Li Differential Structure of Inductive Proximity Sensor, Sensors, 2019, No. 19, pp. 221–230. doi: 10.3390/s19092210

Asadova R. Sh., Mamedov F. I., Asadova K. F. Inductive transformer of linear and angular transference, Patent of the Azerbaijan Republic. Baku, 2008, 005.

Mamedov F. I., Asadova R. Sh. Analytical investigation of optimal parameters of two – functional electromagnetic transducers with continuous magnet conductor, Works of II International Symposium “Problems of mathematical modeling, controlling and information technologies in oil-gas industry”, News of National Academy Of Sciences Of Baku, September 21–26, 2008, pp. 101–103.

Mamedov F. I., Asadova R. Sh., Sattarov V. K., Mamedov J. F. Two-functional inductive transducer of linear and angular transfers, Patent of the Azerbaijan Republic, 990049. Baku, Printed in BI, 1998.

Ji Wu., He Xiao-Ting, Sun Jun-Yi A Theoretical Study on Static Gas Pressure Measurement via Circular Non-Touch Mode Capacitive Pressure Sensor, Sensors, 2024, №24 (16), pp. 3–14. https://doi.org/10.3390/s24165314

Molla-Alipour M., Ganji B. A. Analytical analysis of mems capacitive pressure sensor with circular diaphragm under dynamic load using differential transformation method (DTM), Acta Mech. Solid Syn., 2015, No. 28,pp. 400–408. https://doi.org/10.1016/S0894-9166(15)30025-2

Lian Y. S., Sun J. Y., Ge X. M., Yang Z. X., He X. T., Zheng Z. L. A theoretical study of an improved capacitive pressure sensor: Closed-form solution of uniformly loaded annular membranes, Measurement, 2017, pp. 84–92. https://doi.org/10.1016/j.measurement.2017.07.025

Zhang D. Z., Jiang C. X., Tong J., Zong X. Q., Hu W. Flexible Strain Sensor Based on Layer-by-Layer Self-Assembled Graphene/Polymer Nanocomposite Membrane and Its Sensing Properties, Journal Electron. Mater. 2018, № 47, pp. 2263–2270. http https://link.springer.com/article/10.1007/s11664-017-6052-1

Kumar G. A., Jindal A. U., Sreekanth P. K. Capacitance response of concave well substrate MEMS double touch mode capacitive pressure sensor: Robust design, theoretical modeling, numerical simulation and performance comparison, Silicon, 2022, № 14, pp. 9659–9667. DOI: https://doi.org/10.1007/s12633-022-01693-9

Lian Y. S., Sun J. Y., Zhao Z. H., He X. T., Zheng Z. L. A revisit of the boundary value problem for Foppl – Hencky membranes: Improvement of geometric equations, Mathematics, 2020, № 8, 631 p. https://doi.org/10.3390/math8040631

Sun J. Y., Lian Y. S., Lee Z. L., He X. T., Zheng Z. L. Theoretical study on shaft-loaded blister test technique: Synchronous characterization of surface and interfacial mechanical properties, International Journal of Adhesion and Adhesives, 2014, № 51, pp. 28–39. https://doi.org/10.1016/j.ijadhadh.2014.03.004

Almeida Fernando. Designing and implementation of an intelligent manufacturing system, Journal of Industrial Engineering and Management, 2011, № 4, pp. 45–61. http://dx.doi.org/10.3926/jiem.371

Akhmedova T. A. Intellectual control of flexible manufacturing module with over manipulator and step conveyor, American Journal of Computation and Control, 2015, № 2, pp. 12–15. http://article.aascit.org/file/pdf/9010916.pdf

Akhmedova T. A., Guliyev H. B. Fuzzy Logic Controller to Control Voltage and Reactive Power Flow at the Network with Distributed Generation, Proceedings of the Tenth International Conference on Management Science and Engineering. Management, Springer, 2017, pp. 329–341. DOI https://doi.org/10.1007/978-981-10-1837-4_29

Bakakeu Romuald, Bär, Schirin, Bauer, Jochen et al. An Artificial Intelligence Approach for Online Optimization of Flexible Manufacturing Systems, Applied Mechanics and Materials, 2018, № 882, pp. 96–108. doi.org/10.4028/www.scientific.net/AMM.882.96

Conrad K., Shiakolas P. Robot calibration issue: ac curacy, repeatability and calibration, The University of Texas at Arlington. USA, 2003, pp. 34–45.

https://www.researchgate.net/publication/228686936_Robotic_calibration_issues_Accuracy_repeatability_and_calibration

Kumar Manish, Garg D. P. Intelligent multi-sensor fusion techniques in flexible manufacturing work cells, Proceedings of the American Control Conference, 2004, Vol. 6, pp. 5375–5380. DOI: 10.23919/ACC.2004.1384707

Kolhe J. P., Shaheed M., Chandar T. S., Talole S. E. Robust control of robot manipulators based on uncertainty and disturbance estimation, International Journal of Robust and Nonlinear Control, 2013, Vol. 23, № 1, pp. 104–122. https://doi.org/10.1002/rnc.1823

Kuo T.C. Trajectory control of a robotic manipulator utilizing an adaptive fuzzy sliding mode, World Academy of Science, Engineering and Technology, 2010, Vol. 65, pp. 913–917. https://www.researchgate.net/publication/289291312_Trajectory_control_of_a_robotic_manipulator_utilizing_an_adaptive_fuzzy_sliding_mode

Li R., Anwar A. Parsa, Anwar A. M., Lu T. Dynamic Modeling of Underwater Manipulator and its Simulation, World Academy of Science, Engineering and Technology International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 2012, Vol. 6, № 12, pp. 23–31. https://zenodo.org/record/1078028/files/11836.pdf

Manu G., Kumar M., Vijay & Nagesh H. & Jagadeesh D. & Gowtham M. B. Flexible Manufacturing Systems (FMS), A Review, International Journal of Mechanical and Production Engineering Research and Development, 2018, pp. 323–336. DOI:10.24247/ijmperdapr201836

Pinto Rui. Smart Sensing Components in Advanced Manufacturing Systems, International Journal on Advances in Intelligent Systems, 2016, No. 9, pp. 181–198. https://core.ac.uk/download/pdf/148428405.pdf

Mammadov J. F., Huseynov E. B., Talibov N. H., Akhmedova T. A., Genjeliyeva G. Q. Development of program tool for expert assessment of innovation projects in the scientific technopark, IFAC Papers Online Conference paper archive, Science Direct, 2018, pp. 135–142.

Mamedov J. F., Akhmedova T. A. Algorithm of elements option of control systems of flexible manufacturing system, International Journal of Current Research, 2015,Vol. 7, Issue 03, March, pp. 13779–13783. www.journalcra.com/sites/default/files/issuepdf/7989.pdf

Mamedov F.I. Provision of Turow over manipulator and stop conveyor with sensor coltrols PC1, 2012 Inwinter National conference Problems of constnetistics and informatics. Baku, Azerbaijan, 2012, Vol. 1, September 12–14, pp. 237–239. http://dx.doi.org/10.1109/ICPCI.2012.6486330

Mamedov J. F., Huseynov A. H., Taghiyeva T. A. Functional and Programmatic Simulation of Architecture for Computing Design of Flexible Manufacture, American Journal of Computer Science and Information Engineering. 2014, Vol. 1, № 1, pp. 6–9. http://article.aascit.org/file/pdf/9120727.pdf

Lee M., Choi H. S. A Robust Neural Controller for Underwater Robot Manipulators, IEEE Transactions on

Neural Networks, 2000, Vol. 11, pp. 1465–1470. DOI: 10.1109/IJCNN.1998.687183

Piltan F., Sulaiman N., Allahdadi S., Dialame M., Zare A. Position control of robot manipulator: design a novel SISO adaptive sliding mode fuzzy PD fuzzy slidingmode control, International Journal of Artificial Intelligence and Expert System, 2011, Vol. 2, № 5, pp. 208–228. https://www.cscjournals.org/library/manuscriptinfo.php? mc=IJAE-79

Vidakovic J., Lazarevic M., Kvrgic V., Dancuo Z., Ferenc G. Advanced Quaternion Forward Kinematics Algorithm Including Overview of Different Methods for Robot Kinematics, FME Transactions, Belgrade University, 2014, Vol. 42, № 3, pp. 189–199. DOI:10.5937/fmet1403189v.

Shishaev M. G., Dikovitsky V. V., Nikulina N. V. Architecture and Technologies of Knowledge-Based Multidomain Information Systems for Industrial Purposes, Computer Science On-line Conference. Springer, Cham. 27.04.2016, pp. 201–209. https://link.springer.com/chapter/10.1007/978-3-319-33389-2_34

Sahu B., Subudhi B. The State of Art of Autonomous Underwater Vehicles in Current and Future Decades, 2014 First International Conference on Automation, Control, Energy and Systems (ACES). Hooghy, 2014, pp. 1–6. DOI: 10.1109/ACES.2014.6808014

Timashova L. A. Problems of Intellectualization of the Solution of the Problems of Modeling and Control of Production Processes, USIM, 2016, №4, pp. 16–26.

Timashova L.A., Morozova A. I., Leschenko V. A. and Taran L. Yu. Models of knowledge extraction and structuring, Inductive modeling of folding systems: Proc.,

MNNC 1Т and S. Kiev, 2015, pp. 132–151.

Downloads

Published

2025-06-29

How to Cite

Mammadov, J. F., Ahmadova, T. A., Huseynov, A. H., Talibov, N. H., Hashimova, H. M., & Ahmadov, A. A. (2025). THE SELECTION OF INFORMATION-MEASURING MEANS FOR THE ROBOTOTECHNICAL COMPLEX AND THE RESEARCH OF THEIR WORKER CHARACTERISTICS. Radio Electronics, Computer Science, Control, (2), 20–31. https://doi.org/10.15588/1607-3274-2025-2-2

Issue

Section

Radio electronics and telecommunications